System: BMPCC OG 1080p
Tilt screen mod.
The BMPCC OG screen is fixed. This mod adds a tilting LCD housing built from a 3D-printed enclosure and a CNC machined 6061 aluminum backplate. The backplate also pulls heat away from the camera body and, paired with the Ulanzi CU01 cooler, keeps temperatures low enough to shoot without worrying about overheating.
- STEP + STL included
- Print profiles & parts list
- No soldering required
Two builds, same mod
Choose your build
Same tilting LCD and backplate design, fit two ways depending on how your camera is already set up.
Mounts directly to the camera body, no cage required. The current shipping design.
Sized to fit and mount inside your rig's cage, for builds already caged for other accessories.
What comes with the purchase
Purchase access to the files needed for assembly, there are two options available.
Included in download
- STEP Files (Backplate + Housing)
- STL Files (Print-ready)
- Disassembly & Assembly Guide
- Video Walkthrough Link
- Complete Parts List
Parts List
Specific hardware required to complete the build. Included in the parts list.
- STEP and STL files
- Individual links on AliExpress
- Tools needed
How the build goes
Three stages, no soldering iron required.
Print the LCD housing
ABS, ASA and PETG: under no circumstances should you use PLA.
Machine & buy parts
CNC the backplate from 6061 aluminum, send the STEP file to a shop/manufacturer; the parts list gives you specifics on what to order, pay close attention to the fine print.
Assemble
Seat the heat-set inserts in the LCD housing, follow the disassembly guide, reassemble and shoot.
Before you build
See what you'll need to get started: print prep, bench tools, and every part with live purchase links, specs, and confirm-before-you-pay notes.
Build specs
Warning
This is a DIY digital file. The backplate requires CNC machining. The LCD housing requires a high-temperature 3D printer (ABS/PETG/PC). PLA will warp and fail.
Questions, answered
Q-01What do I need to print the housing?
A printer that can hold a high-temperature filament (ABS, ASA, PC or PA) at temperature, ideally enclosed. The housing sits next to the camera body and PLA will warp and fail.
Q-02Which cameras does it fit?
Both builds are designed for the original Blackmagic Pocket Cinema Camera (BMPCC OG 1080p) only.
Q-03Cageless or Cage: which one do I need?
The Cageless option mounts straight to the camera body, no cage required, and is mainly for those who shoot the BMPCC naked. The Cage option is sized to fit and mount inside a cage, but this limits how far the screen can tilt. If you want to see yourself while filming, the Cageless option is the better fit.
Q-04What's the license?
Personal use only: print, machine and build as many as you like for yourself. Reselling the files, or prints/parts made from them, is not permitted. If you have any further questions, do get in touch.
Q-05Do I get future updates?
Yes, lifetime updates of the current design.
Tilt Screen Mod.
Instant download after purchase · lifetime updates · reversible install
Introductory offer: $39.99One-time purchase ◆ files delivered instantly
Disclaimer
Modifying your camera carries real risks, including the potential for permanent damage to your device. By purchasing and using these files, you accept full responsibility for the build process and any outcomes. I am not liable for any damage done to your equipment. Read full disclaimer.